Point to Point / Point to Multi Point Systems

LigoSU 5-N/ 5-20/ 5-23
High-performance 5 GHz subscriber unit

Incredible performance LigoPTMP series point to multipoint system delivers 600+ Mbps throughput via its unique and powerful RF design that supports up to 256QAM modulation and 30 dBm output power. 720 MHz dedicated CPU ensures swift data processing and high packet per second rate (PPS) which is important for real time data transmission applications. Gigabit Ethernet port supporting 802.3af/at standard allows powering the devices with PoE switches. Weatherproof IP-67 standard rated enclosure design allows using the equipment in any climate conditions.

Specifications:
Radio
  • Wireless protocol – W-Jet V
  • Radio mode – MIMO 2×2
  • Frequency range – 4.900 – 6.100 GHz (FCC: 4.940 – 4.990 GHz, 5.150-5.250 GHz, 5.725-5.850 GHz)
  • Channel size – 5, 10, 20, 40, 80 MHz
  • Modulation schemes – OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)
  • Data rates @ 80 MHz – 866, 780, 650, 585, 520, 390, 260, 195, 130, 65 Mbps
  • Duplexing scheme – TDD
  • Error correction – BCC, LDPC
Antenna
  • LigoSU 5-N – 2 N-type connectors
  • LigoSU 5-20 – Integrated directional dual-pol 20 dBi antenna
  • LigoSU 5-23 – Integrated directional dual-pol 23 dBi panel
Wired
  • Interface – 10/100/1000 Base-T with PoE IN (RJ45)

LigoPTP 5-N/5-23 MiMO PRO

5 GHz point-to-point integrated /connectorized backhaul device

LigoWave unleashes its highest capacity, license-free PTP device with the release of the LigoPTP PRO series
product line. Making use of ground breaking 2×2 MiMo technology, the LigoPTP 5-23/5-N PRO delivers real
aggregate throughput capability of up to 220 Mbps (110Mbps full-duplex) combined with high packets-per-second performance. Additionally, the new product is compatible with previous LigoPTP 5-23 MiMo and LigoPTP 5-N MiMo models. This product enables carrier-class point-to-point capability, ideal for dedicated access or backhaul applications (including VOIP or other small packet applications). The Ligo PTP PRO product family couples flexible channel width capability (20 or 40 MHz) and industry-leading proprietary
software mechanisms to set the utmost standard in spectral efficiency.

The LigoPTP 5-23/5-N PRO products feature either an integrated dual-polarized antenna or two N-type connectors. They are housed in rugged, cast aluminum enclosures. Combining digital signal processing, dual polarization antennas and proprietary W-Jet 2 MiMo protocol these bridges have a high spectral efficiency of 7.5bit/Hz.

Specifications:
Radio
  • Wireless technology – Proprietary W-Jet protocol, 2×2 MIMO
  • Operating mode – Point-to-point
  • Radio frequency band – 5.150 – 5.915 GHz
  • Channel size – Configurable 20, 40 MHz
  • Max transmit power – 30 dBm*
  • Modulation schemes – BPSK, QPSK, 16QAM, 64QAM
  • Receive sensitivity – Varying between -94 and -72 dBm depending on modulation and channel size
  • Error correction – FEC, Selective ARQ
  • Duplexing scheme – Dynamic time division duplex
Antenna
  • Type – Integrated directional panel (LigoPTP 5-23 PRO) or 2 N-Type connectors (LigoPTP 5-N PRO)
  • Polarization – Dual (LigoPTP 5-23 PRO)
  • Gain V/H – 23/23 dBi (LigoPTP 5-23 PRO)
  • 3dB Beam-width V/H – 8/8 degrees (LigoPTP 5-23 PRO)
Data Interface
  • Physical interface – 10/100/1000 BaseT
  • Protocol – Ethernet IEEE 802.3
  • Connector type – RJ45
  • Surge protection – Built-in (IEC 61000-4-2 (ESD) and IEC 61000-4-5 (SURGE))
Link performance
  • Real data throughput – 220 Mbps aggregate (110 Mbps full-duplex)
  • Max packets per second – 65,000
  • Packet latency – 2 ms (64 bytes packet)
  • Recommended link distance – More than 100 km (62,17 mi)

LigoPTP 4-N/ 4-23 RapidFire

Outdoor Wireless Point-to-Point Bridge

Outstanding Capacity

RapidFire delivers an extremely high 140Mbps (20MHz channel) throughput via its unique and powerful RF design that supports up to 256-QAM modulation and 26dBi output power. Our proprietary W-Jet V protocol, specifically engineered for high performing PTP scenarios, minimizes interferences even across long distances and stabilizes latency within 2-4 ms.

Professional Design

In addition to achieving maximum performance, LigoWave focuses on delivering flexibility and ease-of-use in our RapidFire series. The robust mounting bracket enables rapid deployment of the links and ensures survivability during high wind-load. The integrated antenna possesses a 45° rotation option which increases installation flexibility; especially advantageous in noisy spectrum areas. A GORE© membrane vent allows fast pressure equalization of the IP-67 rated cast aluminum enclosure to prevent condensation and to ensure seal performance . A detachable handle eases transporting the devices up towers and over rough terrains. Newly designed RGB LEDs indicate different device statuses and signal levels (in 1dBm steps) when aligning the antenna.

Easy Pre-Configuration

Multiple options to pre-configure LigoPTP RapidFire devices are displayed in a scheme below. Devices can be connected with each other using wired or wireless connectivity. End-user device can also connect to the master device using 2.4GHz access radio or using wire to the Ethernet port of the master device. LigoPTP RapidFire devices can be discovered using bonjour and SSDP protocols as well.

Specifications:
Radio
  • Wireless protocol – W-Jet V
  • Radio mode – MIMO 2×2
  • Frequency range – 4.940 – 4.990GHz
  • Channel size – 5, 10, 20MHz
  • Modulation schemes – OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)
  • Data rates @ 20MHz – 173, 144, 130, 116, 87, 58, 43, 29, 14Mbps
  • Duplexing scheme – TDD
  • Error correction – BCC, LDPC
  • Automatic Channel Selection – DFS Compatability
  • Automatic TPC – Supported
Antenna
  • LigoPTP 4-23 RapidFire – Integrated directional dual-pol 23dBi panel
  • LigoPTP 4-N RapidFire – 2 N-type connectors
Wired
  • First Interface – 10/100/1000 Base-T with PoE IN (RJ45)
  • Second Interface – 10/100/1000 Base-T with PoE OUT (RJ45)

LigoPTP 5-N/ 5-23 RapidFire

Outdoor Wireless Point-to-Point Bridge

Outstanding Capacity

RapidFire delivers an extremely high 700Mbps throughput via its unique and powerful RF design that supports up to 256-QAM modulation and 31dBi output power. Our proprietary W-Jet V protocol, specifically engineered for high performing PTP scenarios, minimizes interferences even across long distances and stabilizes latency within 2-4 ms.

Powerful All-in-One Hardware Platform

LigoWave RapidFire delivers powerful performance with its new 1.2GHz CPU dedicated for data processing and high (200,000) packet per second delivery. Equipped with two Gigabit Ethernet ports, one with PoE passthrough, the unit allows for 1+1 (failover) or repeater links and is ideal for high-security video surveillance scenarios. RapidFire incorporates integrated surge and ESD protection according to IEC standards and passes Class 4 requirements.

Specifications:
Radio
  • Wireless protocol – W-Jet V
  • Radio mode – MIMO 2×2
  • Frequency range – 4.900 – 6.100GHz (FCC: 4.940 – 4.990GHz, 5.150-5.250GHz, 5.725-5.850GHz)
  • Channel size – 5, 10, 20, 40, 80MHz
  • Modulation schemes – OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)
  • Data rates @ 80MHz – 866, 780, 650, 585, 520, 390, 260, 195, 130, 65Mbps
  • Duplexing scheme – TDD
  • Error correction – BCC, LDPC
  • Automatic Channel Selection – DFS Compatability
  • Automatic TPC – Supported
Antenna
  • LigoPTP 5-23 RapidFire – Integrated directional dual-pol 23dBi panel
  • LigoPTP 5-N RapidFire – 2 N-type connectors
Wired
  • First Interface – 10/100/1000 Base-T with PoE IN (RJ45)
  • Second Interface – 10/100/1000 Base-T with PoE OUT (RJ45)

LigoPTP 6-N/ 6-25 RapidFire

6GHz Outdoor Wireless Point-to-Point Bridge

The LigoPTP RapidFire is a high-performance wireless bridge for long-distance heavy-duty point-to-point applications.

It delivers an outstanding 700Mbps with its powerful hardware platform that supports modulations of up to 256-QAM and 30dBm output power, making it the top performer even in dense and noisy environments.

The W-Jet proprietary protocol, engineered for capacity-demanding PTP scenarios, minimizes interference and stabilizes latency even with long-distance links.

The 6GHz Generation

The LigoPTP RapidFire 6 — an extension of the time-tested LigoPTP line of wireless data transfer devices — empowers users to deliver superb connectivity over 6GHz frequencies. The 6GHz band provides more leg room for all types of wireless networks, allowing users to find minimally crowded channels, experience less noise and interference, and achieve greater range and throughput.

Specifications:
Radio
  • Wireless Protocol – W-Jet V
  • Radio Mode – MIMO 2×2
  • Frequency Range – 5.900–6.400GHz
  • Channel Size – 5, 10, 20, 40, 80MHz
  • Modulation Schemes – OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)
  • Data Rates @ 80MHz – 866, 780, 650, 585, 520, 390, 260, 195, 130, 65Mbps
  • Duplexing Scheme – TDD
  • Error Correction – BCC, LDPC
  • Automatic TPC – Supported
Antenna
  • LigoPTP 6-25 RapidFire – Integrated Directional Dual-Pol 25dBi Panel
  • LigoPTP 6-N RapidFire – 2 N-type Connectors
Wired
  • First Interface – 10/100/1000 Base-T with PoE IN (RJ45)
  • Second Interface – 10/100/1000 Base-T with PoE OUT (RJ45)