Access Points

NFT 2 ac

Dual-band, Dual-radio 802.11ac Indoor Access Point

The NFT 2AC is a WI-FI access point based on 802.11ac technology with an integrated 2.4 and 5GHz (2×2) MiMo radios with 27dBm output power. The gigabit Ethernet port with 802.3af/at support allows powering the device with PoE switches. Two additional Gigabit Ethernet ports allow extending the network or connecting additional devices to the access point. Small form factor (15cm only), sleek design and unique mounting bracket makes the NFT 2AC ideal for indoor installations requiring cost-effective high-performance devices.

Small form factor, dual-radio access point equipped with two 2×2 MIMO 802.11ac radios operating in the 2.4 and 5 GHz bands concurrently and reaching 1.167 Gbps data rate.

Specifications:
Wireless
  • WLAN standard – IEEE 802.11a/b/g/n/ac
  • Radio mode – MIMO dual 2×2
  • Operating mode – Access point, repeater
  • Radio frequency band
    • 2.402 – 2.484GHz (country dependent) FCC 2.412 – 2.462GHz (CH1-CH11)
    • 5.170 – 5.875GHz (country dependent) FCC 5.745 – 5.825GHz (CH149-CH161)
  • Transmit power
    • 2.4GHz: 27dBm @ MCS0
    • 5GHz: 27dBm @ MCS0
  • Channel size – 20, 40, 80MHz
  • Modulation schemes
    • 802.11ac: OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)
    • 802.11a/g/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
    • 802.11b: DSS (CCK, DQPSK, DBPSK)
  • Data rates
    • 802.11ac @ 80MHz: 866, 780, 650, 585, 520, 390, 260, 195, 130, 65Mbps
    • 802.11n @ 40MHz: 300, 270, 240, 180, 120, 90, 60, 30Mbps
    • 802.11a/g @ 20MHz: 54, 48, 36, 24, 18, 12, 9, 6Mbps
    • 802.11b @ 20MHz: 11, 5.5, 2, 1Mbps
  • Duplexing scheme – Time division duplex
  • Wireless security – WPA/WPA2 Personal, WPA/WPA2 Enterprise, WACL, Hotspot (UAM)
  • Roaming – Yes
Antenna
  • Type – 4 × internal omni-directional antennas
  • Gain
    • 2.4GHz: 3dBi
    • 5GHz: 3dBi
  • Coverage radius – 100 meters (328ft)
Wired
  • Interface – 3 × 10/100/1000 Base-T, RJ-45
Networking
  • Operating mode – Bridge, router IPv4 and IPv6
  • Management IPv4 – Static, dynamic
  • Management IPv6 – Static, dynamic stateless, dynamic stateful
  • Secondary IPv4 – Supported
  • VLAN – 802.1Q for management and data
  • Virtual SSID – 8 per each radio
  • Client isolation – Supported
  • Bandwidth limitation – Supported per SSID

NFT 3ac

High performance dual-radio 802.11ac access point

The Infi nity NFT 3AC is a high-performance dual-radio access point from LigoWave, equipped with two 3×3 MIMO 802.11ac radios operating in the 2.4 and 5 GHz bands concurrently. A dedicated Qualcomm Atheros AR9558 CPU (720 MHz) makes this AP ideal for enterprise capacity demanding applications reaching 450 Mbps data rate on a 2.4 GHz radio and 1300 Mbps data rate on a 5 GHz radio. There are two Gigabit Ethernet ports and one of them supports 802.3af/at standard for easy and quick deployment using PoE switches.

Integrated security radio

The NFT 3AC has an integrated dual-band radio dedicated for security and RF management. It also allows
doing real-time spectrum analysis without any interruption to the the main radios dedicated for access.

Specifications:
Wireless
  • WLAN standard – IEEE 802.11 a/b/g/n/ac
  • Radio mode – MIMO dual 3×3
  • Operating mode – Access point, repeater
  • Radio frequency band
    • 2.402 – 2.484 GHz (country dependent) FCC 2.412 – 2.462 GHz (CH1-CH11)
    • 5.170 – 5.875 GHz (country dependent) FCC 5.745 – 5.825 GHz (CH149-CH161)
  • Transmit power
    • 2.4 GHz: 22 dBm per chain @ MCS23
    • 5 GHz: 22 dBm per chain @ MCS23
  • Channel size – 20, 40, 80 MHz
  • Modulation schemes
    • 802.11 ac: OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)
    • 802.11 a/g/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
    • 802.11 b: DSS (CCK, DQPSK, DBPSK)
  • Data rates
    • 802.11 ac @ 80 MHz: 1300, 1170, 975, 780, 585, 390, 292.5, 195, 97.5 Mbps
    • 802.11 n @ 40 MHz: 450, 405, 360, 270, 180, 135, 90, 45 Mbps
    • 802.11 a/g @ 20 MHz: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
    • 802.11 b @ 20 MHz: 11, 5.5, 2, 1 Mbps
  • Duplexing scheme – Time division duplex
  • Wireless security – WPA/WPA2 Personal, WPA/WPA2 Enterprise, WACL, Hotspot (UAM)
  • Roaming – Yes
Antenna
  • Type – 6x internal omni-directional antennas
  • Gain
    • 2.4 GHz: 3 dBi
    • 5 GHz: 3 dBi
  • Coverage radius – 150 meters (492 ft)
Wired
  • Interface – 2 x 10/100/1000 Base-T, RJ-45
Networking
  • Operating mode – Bridge, router IPv4 and IPv6
  • Management IPv4 – Static, dynamic
  • Management IPv6 – Static, dynamic stateless, dynamic stateful
  • Secondary IPv4 – Supported
  • VLAN – 802.1Q for management and data
  • Virtual SSID – 8 per each radio

NFT 1N/ NFT 1N AF

2.4 GHz, 802.11N (2×2) indoor access point

The NFT 1N/ 1N AF are indoor WI-FI access points based on 802.11N technology with integrated  2.4 GHz (2×2) MiMo radios boasting an output power of 28 dBm. 3 Ethernet ports allow connecting multiple devices to the access point. The NFT 1N model is powered with a 12-24V passive PoE adaptor and the NFT 1N AF model supports the 802.3af standard, which allows powering the device using a PoE switch.

OS

The indoor access point runs the Infinity OS – a highly functional and easy to use operating system. This powerful and flexible operating system ensures flawless operation of LigoWave hardware devices and effortless setup for those deploying the networks.

  • Responsive HTML 5 based GUI
  • 128 concurrent clients
  • 8 virtual networks (SSID+VLAN)
  • IPv6 support
  • WNMS compatible
Specifications:
Wireless
  • WLAN standard – IEEE 802.11 b/g/n
  • Radio mode – MIMO 2×2
  • Operating mode – Access point, repeater
  • Radio frequency band – 2.402 – 2.484 GHz (country dependent) FCC 2.412 – 2.462 GHz (CH1-CH11)
  • Transmit power – 2.4 GHz: 28 dBm @ MCS0 (FCC Max certifi ed TX power: 28 dBm)
  • Channel size – 20, 40 MHz
  • Modulation schemes
    • 802.11 g/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
    • 802.11 b: DSS (CCK, DQPSK, DBPSK)
  • Data rates
    • 802.11 n @ 40 MHz: 300, 270, 240, 180, 120, 90, 60, 30 Mbps
    • 802.11 g @ 20 MHz: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
    • 802.11 b @ 20 MHz: 11, 5.5, 2, 1 Mbps
  • Duplexing scheme – Time division duplex
  • Wireless security – WPA/WPA2 Personal, WPA/WPA2 Enterprise, WACL, Hotspot (UAM)
  • Roaming – Yes
Antenna
  • Type – 2 x internal omni-directional antennas
  • Gain – 3 dBi
  • Coverage radius – 100 meters (328 ft)
Wired
  • Interface – 3 x 10/100 Base-T, RJ45
Networking
  • Operating mode – Bridge, router IPv4 and IPv6
  • Management IPv4 – Static, dynamic
  • Management IPv6 – Static, dynamic stateless, dynamic stateful
  • Secondary IPv4 – Supported
  • VLAN – 802.1Q for management and data
  • Virtual SSID – 8 per each radio
  • Client isolation – Supported

NFT 2 ac Outdoor

Dual-band, dual-radio 802.11ac outdoor access point

The NFT 2AC outdoor is a WI-FI access points based on 802.11ac technology with integrated 2.4 and 5 GHz (2×2) MiMo radios boasting an output power of 29 dBm. The gigabit Ethernet port with 802.3af/at support allows powering the device with PoE switches. The provided N-type connectors support a variety of antennas to be utilized based on the specific application. The IP-67 standards  rated enclosure, integrated surge protection and professional mounting bracket help ensure continuous operation in the harshest of weather conditions.

OS

The outdoor access point runs the Infinity OS – a highly functional and easy to use operating system. This
powerful and flexible operating system ensures flawless operation of LigoWave hardware devices and effortless setup for those deploying the networks.

  • Responsive HTML 5 based GUI
  • 256 concurrent clients
  • 16 virtual networks (SSID+VLAN)
  • IPv6 support
  • WNMS compatible
Specifications:
Wireless
  • WLAN standard – IEEE 802.11 a/b/g/n/ac
  • Radio mode – MIMO dual 2×2
  • Operating mode – Access point, repeater
  • Radio frequency band
    • 2.402 – 2.484 GHz (country dependent) FCC 2.412 – 2.462 GHz (CH1-CH11)
    • 5.170 – 5.875 GHz (country dependent) FCC 5.745 – 5.825 GHz (CH149-CH161)
  • Transmit power
    • 2.4 GHz: 29 dBm @ MCS0
    • 5 GHz: 29 dBm @ MCS0
  • Channel size – 20, 40, 80 MHz
  • Modulation schemes
    • 802.11 ac: OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)
    • 802.11 a/g/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
    • 802.11 b: DSS (CCK, DQPSK, DBPSK)
  • Data rates
    • 802.11 ac @ 80 MHz: 866, 780, 650, 585, 520, 390, 260, 195, 130, 65 Mbps
    • 802.11 n @ 40 MHz: 300, 270, 240, 180, 120, 90, 60, 30 Mbps
    • 802.11 a/g @ 20 MHz: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
    • 802.11 b @ 20 MHz: 11, 5.5, 2, 1 Mbps
  • Duplexing scheme – Time division duplex
  • Wireless security – WPA/WPA2 Personal, WPA/WPA2 Enterprise, WACL, Hotspot (UAM)
  • Roaming – Yes
Antenna
  • Type – 4 x N-type connectors
  • Coverage radius – Antenna dependent
Wired
  • Interface – 1 x 10/100/1000 Base-T, RJ-45
Networking
  • Operating mode – Bridge, router IPv4 and IPv6
  • Management IPv4 – Static, dynamic
  • Management IPv6 – Static, dynamic stateless, dynamic stateful
  • Secondary IPv4 – Supported
  • VLAN – 802.1Q for management and data
  • Virtual SSID – 8 per each radio
  • Client isolation – Supported